Quick Eagle Networks Network Card T1 DSU User Guide

The Solo T1 DSU

Providing a new level of versatility

for broadband access.

Main Features:

Quick Eagle’s Solo T1 DSU is a full-featured, single port DSU that provides a

versatile, cost-effective interface between high-speed data terminal equipment

(DTE) and public or private T1 networks. It features a software-selectable DTE

interface, which can be configured for RS-449/EIA-530 or V.35. Bandwidth

allocation, also software selectable, allows you to configure the Solo T1 DSU for

data rates from 56 kbps up to a full T1 data rate of 1.536 Mbps.

• Fully SNMP-manageable

• Telnet management access via

COMM port

• Alarm dial-out connection for

unattended remote operation

You can manage the Solo T1 DSU from a Telnet or local VT-100-compatible

terminal. It can also be managed from a management station located at a c

entral site. The Solo T1 DSU supports the industry-standard Simple Network

Management Protocol (SNMP) management information base (MIB II). It also

features a device-specific enterprise MIB that allows you to configure, monitor

and control all significant operating parameters.

• Extensive diagnostic features:

• Front-panel LEDs

• Built-in test patterns, test

loops, and diagnostic tests

• Non-disruptive downloadable

code for easy upgrades

• Available in stand alone and

chassis-based module versions

The Solo T1 DSU offers an extensive suite of diagnostic capabilities for local

and remote fault analysis, and features more than a dozen user-settable alarm

parameters and performance thresholds for remote alarm reporting.