RCA Clock Radio RC40 User Guide

v2.0 (1.0.2.0) (EN/F)  
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE  
the provided plug does not fit into  
your outlet, consult an electrician  
for replacement of the obsolete  
outlet.  
Protect the power cord from being  
walked on or pinched particularly at  
plugs, convenience receptacles, and  
the point where they exit from the  
apparatus.  
ADDITIONAL SAFETY INFORMATION  
lighted candled should be placed on  
the apparatus.  
Attention should be drawn to the  
environmental aspects of battery  
disposal.  
Important battery  
precautions  
For your records  
In the event that service should be  
required, you may need the model  
number and the serial number. In the  
space below, record the date and place  
of purchase and the serial number:  
Model No.:  
Date of Purchase:  
Place of Purchase:  
Serial No.:  
user manual  
guide de l’utilisateur  
Apparatus shall not be exposed to  
dripping or splashing and no objects  
filled with liquids, such as vases,  
shall be placed on the apparatus.  
Always leave sufficient space around  
the product for ventilation. Do  
not place product in or on a bed,  
rug, in a bookcase or cabinet that  
may prevent air flow through vent  
openings.  
Any battery may present a risk of  
fire, explosion, or chemical burn  
if abused. Do not try to charge a  
battery that is not intended to be  
recharged, do not incinerate, and  
do not puncture.  
The use of apparatus in moderate  
climates.  
RC40  
RC40R  
This is class II  
equipment designed  
with double or  
reinforced insulation  
so it does not require  
a safety connection to  
electrical earth (US:  
ground).  
Non-rechargeable batteries, such as  
alkaline batteries, may leak if left in  
your product for a long period of  
time. Remove the batteries from the  
product if you are not going to use  
it for a month or more.  
If your product uses more than one  
battery, do not mix types and make  
sure they are inserted correctly.  
Mixing types or inserting incorrectly  
may cause them to leak.  
Only use attachments/accessories  
specified by the manufacturer.  
Use only with  
Do not place lighted candles,  
cigarettes, cigars, etc. on the  
product.  
Connect power cord only to AC  
power source as marked on the  
product.  
the cart, stand,  
Some of the following information may  
not apply to your particular product;  
however, as with any electronic product,  
precautions should be observed during  
handling and use.  
]
Service information  
tripod, bracket,  
or table  
This product should be serviced only by  
those specially trained in appropriate  
servicing techniques. For instructions  
on how to obtain service, refer to the  
warranty included in this user manual.  
specified by the  
manufacturer,  
or sold with  
Portable Cart Warning  
Care should be taken so that objects  
do not fall into the product.  
Do not attempt to disassemble  
the cabinet. This product does  
not contain customer serviceable  
components.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near  
water.  
Plugging in for power  
AC OUTLET POWER SUPPLY:  
120 V~60 Hz  
the apparatus.  
When a cart is used, use caution  
when moving the cart/apparatus  
combination to avoid injury from  
tip-over.  
Unplug this apparatus during  
lightning storms or when unused  
for long periods of time.  
Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus has  
been damaged in any way, such  
as power-supply cord or plug is  
damaged, liquid has been spilled  
or objects have fallen into the  
apparatus, the apparatus has been  
exposed to rain or moisture, does  
not operate normally, or has been  
dropped.  
Discard any leaky or deformed  
battery immediately. They may  
cause skin burns or other personal  
injury.  
Technical information  
Product: Clock Radio  
Brand: RCA  
Model: RC40, RC40R  
Power Supply: 120 V ~ 60 Hz  
Power Consumption: 6 Watts  
The AC power plug is  
polarized (one blade is  
wider than the other)  
and only fits into AC  
power outlets one  
way. If the plug will  
not go into the outlet  
The marking information is located  
at the bottom of apparatus.  
To be completely disconnect the  
power input, the main plug of  
apparatus shall be disconnected  
from the mains.  
Clean only with dry cloth.  
Please help to protect the  
Do not block any ventilation  
openings. Install in accordance with  
the manufacturer’s instructions.  
Do not install near any heat sources  
such as radiators, heat registers,  
stoves, or other apparatus (including  
amplifiers) that produce heat.  
Do not defeat the safety purpose  
of the polarized or grounding-type  
plug. A polarized plug has two  
blades with one wider than the  
other. A grounding type plug has  
two blades and a third grounding  
prong. The wide blade or the third  
prong is provided for your safety. If  
environment by recycling or  
disposing of batteries according to  
federal, state, and local regulations.  
WARNING: The battery (battery or  
batteries or battery pack) shall not  
be exposed to excessive heat such as  
sunshine, fire or the like.  
completely, turn the plug over and try  
to insert it the other way. If it still does  
not fit, contact a qualified electrician  
to change the outlet, or use a different  
one. Do not attempt to bypass this  
safety feature.  
Main plug is a disconnect device.  
The main plug should not be  
obstructed OR should be easily  
accessed during intended use.  
The ventilation should not be  
impeded by covering the ventilation  
openings with items such as  
newspaper, table-cloths, curtains etc.  
No naked flame sources such as  
Ecology  
EN/F  
Help protect the environment - we  
recommend that you dispose of used  
batteries by putting them into specially  
designed receptacles.  
It is important to read this user manual prior to using your new product for the first time.  
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre  
nouveau produit pour la première fois.  
FCC Information  
Before you begin  
General controls  
Wake 1 mode  
2. Insert 2 AA batteries (included).  
3. Replace the compartment door.  
Plugging in for power  
Front view  
Back view  
Changes or modifications not expressly  
approved by Audiovox could void  
FCC Information  
AC OUTLET POWER SUPPLY: 120V~60Hz  
SNOOZE – enter snooze mode where  
the alarm will quiet but sound again  
once the snooze period is over.  
BRIGHTNESS – select display  
brightness (high or low).  
Note: This equipment has been tested  
Large display: Clock time or  
radio frequency  
the user’s authority to operate the  
and found to comply with the limits  
equipment.  
Refer to the “Clock” section and  
follow the instructions to get the  
clock time shown correctly with the  
Auto Clock set feature.  
for a Class B digital device, pursuant  
to Part 15 of FCC Rules. These limits  
are designed to provide reasonable  
protection against harmful interference  
in a residential installation. This  
equipment generates, uses, and can  
radiate radio frequency energy and, if  
not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communications.  
Note: we recommend that you replace  
the batteries every year.  
DST – turn daylight saving function on  
or off.  
Manufacturer/Responsible Party  
RADIO – turn on the radio.  
Audiovox Accessories Corporation  
111 Congressional Blvd., Suite 350  
Carmel, IN 46032  
REV – set clock or wake time  
(decrease value).  
TIME ZONE – press repeatedly to select  
a time zone  
Power failure indicator  
When AC power is interrupted  
Battery back-up operation  
(disconnected) for a short period of  
time, both time and alarm settings  
will change (unless batteries are  
installed). After AC power is restored  
(reconnected), the Digital Display  
will blink to indicate that power was  
interrupted and you should readjust the  
time and alarm settings.  
This clock radio is equipped with  
a memory holding system that can  
be powered with 2 “AA” batteries  
(included). The power failure  
protection circuit will not operate  
unless battery is installed.  
When normal household power  
is interrupted, or AC line cord  
is unplugged, the batteries will  
power the clock radio to keep  
track of time and alarm settings  
programmed into memory.  
When the battery backup functions,  
the digital display will not light,  
however, the function of alarm  
still occurs during the power  
interruption if remaining battery  
power is adequate.  
FWD  
– set clock or wake time  
BAND – select between AM and FM  
bands.  
(increase value).  
OFF – turn off the unit.  
Small display: Wake time  
Wake 2 mode  
However, there is no guarantee  
that interference will not occur in a  
particular installation. If this equipment  
does cause harmful interference to  
radio or television reception, which  
can be determined by turning the  
equipment off and on, the user is  
encouraged to try to correct the  
interference by one or more of the  
following measures:  
CHECK WAKE TIME – check the  
currently set wake time.  
Top view  
SLEEP – activate sleep function.  
–VOLUME+ – adjust volume.  
Power is fed to the unit even  
when it is not functioning. To  
cut the power supply off, the  
power cable must be unplugged.  
TUNING – select radio frequencies.  
/WAKE1/WAKE2/ – slide switch to  
set Wake 1, Wake 2 and clock time.  
WAKE –  
OFF – activate and set  
Reorient or relocate the receiving  
antenna.  
wake function.  
Increase the separation between the  
equipment and receiver.  
Connect the equipment into an  
outlet on a circuit different from  
that to which the receiver is  
connected.  
Normal operation will resume after  
AC power is restored so you will not  
have to reset the time or the alarm.  
To install batteries:  
Consult the dealer or an  
experienced radio/TV technician for  
help.  
1. Remove battery compartment door  
(located at the bottom of the radio)  
by applying thumb pressure to the  
tab on battery door and then lift  
the door out and off the cabinet.  
Clock  
Radio  
Wake function  
Selecting radio mode  
Setting wake time  
This unit allows two wake times to  
be set.  
Auto clock set  
1
1
2
2
– Wake 1 by alarm  
US time zones  
Setting clock manually  
When tuning in FM stations, you may  
notice that the station you are tuning  
can be well-tuned on two or three  
nearby points on the dial. Always tune  
carefully at the loudest and clearest  
point.  
Press RADIO to switch on radio.  
– Wake 1 by radio  
– Wake 2 by alarm  
– Wake 2 by radio  
You do not have to set the clock time as  
a built-in automatic time set system is  
equipped in this clock powered by 2 AA  
batteries (included and installed).  
1. Slide the switch  
/WAKE1/  
Seattle  
Olympia  
WAKE2/  
to clock  
on the top of the unit  
position.  
Washington  
Maine  
Augusta  
Montana  
North Dakota  
Bismarck  
1. Slide the switch  
WAKE2/ on the top of the unit  
to WAKE 1 or WAKE 2 position.  
/WAKE1/  
Salem  
Helena  
Switching band  
Minnesota  
St. Paul  
Montpelier  
Vt.  
N.H.  
Oregon  
Idaho  
Boise  
Concord  
Boston  
Albany  
New York  
South Dakota  
Pierre  
Mass.  
Wisconsin  
Madison  
Slide the BAND switch on the back of  
the unit to select FM or AM band.  
Providence  
Michigan  
Lansing  
Detroit  
R.I.  
The unit equips with GRAD-U-  
WAKE feature, the alarm tone  
volume will increase gradually to  
its maximum in about 30 to 45  
seconds.  
Wyoming  
Hartford  
2. Press  
REV or FWD  
to set the  
Conn.  
New York  
Trenton  
Pennsylvania  
Philadelphia  
Harrisburg  
Md.  
Chicago  
Iowa  
To set the clock time correctly:  
1. Plug for power  
New Jersey  
Delaware  
Cheyenne  
clock time. The time decrements or  
increments will follow by a faster  
rate when you press and hold the  
buttons.  
Nebraska  
Sacramento Carson City  
Alaska  
(AKST)  
Des Moines  
Salt Lake City  
Utah  
Ohio  
Columbus  
Lincoln  
Nevada  
Indiana  
Illinois  
Springfield  
WAansnhapinolgiston, D.C.  
West  
San Francisco  
California  
Virginia  
2. Press  
REV or FWD  
to set the  
Indianapolis  
Denver  
Richmond  
Virginia  
Topeka  
Colorado  
St. Louis  
Charleston  
Frankfort  
Kentucky  
AM antenna  
Kansas  
Jefferson City  
respective wake time. The time  
decrements or increments will  
follow by a faster rate when you  
press and hold the buttons.  
The wake time, corresponding wake  
timer indicator (WK-1 for WAKE 1  
and WK-2 for WAKE 2) and AM/  
PM time indicator flash on the small  
display.  
Insert the plug of the  
unit into an AC power  
outlet.  
Las Vegas  
Summer  
Tuning the radio  
Rotate the TUNING knob on the  
right of the unit to adjust the radio  
frequency that shows on the large  
display.  
Missouri  
Raleigh  
North Carolina  
Winter  
A built-in ferrite rod antenna eliminates  
the need for an outside antenna for  
AM reception. Rotating the unit slightly  
may improve reception of distant AM  
stations.  
Nashville  
Los Angeles  
Santa Fe  
Tennessee  
Memphis  
Oklahoma  
Oklahoma City  
Arizona  
Phoenix  
Columbia  
Arkansas  
Little Rock  
South  
New Mexico  
Atlanta  
Carolina  
The “:” between hour and minute  
time flashes when you are setting  
the time. AM or PM icon will also  
show beside the time.  
Alabama  
Montgomery  
Mississippi  
Jackson  
Georgia  
Dallas  
Hawaii-  
Aleutian  
(HST)  
Louisiana  
Texas  
Checking wake time  
Baton  
Austin  
2. Select daylight saving  
Rouge  
New Orleans  
Houston  
Press CHECK WAKE TIME  
repeatedly to show the currently set  
wake time 1 and 2.  
Florida  
Miami  
Slide the DST switch at the  
back of the unit to turn on/  
off in areas observing/not  
observing such time change.  
Puerto Rico  
Pacific Mountain  
(PST) (MST)  
Central Eastern  
(CST) (EST)  
Atlantic  
(AST)  
Built-in AFC  
3. Slide the switch  
/WAKE1/  
The wake time, corresponding wake  
timer indicator (WK-1 for WAKE 1  
and WK-2 for WAKE 2) and AM/  
PM time indicator show on the  
small display.  
If corresponding wake function is  
not activated, OFF shows on the  
small display.  
The Built In Automatic Frequency  
Control (AFC) works only on FM. It helps  
reducing drift on FM reception and  
keeping the radio locked in on the FM  
station to which it is tuned.  
WAKE2/  
to lock  
on the top of the unit  
position when finished.  
Canadian time zones  
3. Slide the switch  
/WAKE1/  
3. Select your time zone  
WAKE2/  
to  
on the top of the unit  
position when finished.  
Press TIME ZONE  
repeatedly at the  
back of the unit to  
cycle through the  
time zones (EST > CST  
> MST > PST > AKST > HST > AST  
> EST...). The default time zone is  
Eastern (EST) (refer to the maps on  
the right).  
Yukon  
Territory  
Selecting wake source  
You may be woken up by radio or  
alarm.  
1. Select an AM or FM station (see  
directions on “Radio”).  
Brightness control  
Nunavut  
Northwest Territories  
British  
Columbia  
Slide BRIGHTNESS switch on the back  
of the unit to Hi (high) or Lo (low)  
position to adjust the brightness of all  
the displays at the front of the unit.  
Newfoundland  
Summer  
Alberta  
Winter  
Manitoba  
Saskatchewan  
2. Set a wake time (see above  
direction).  
Quebec  
Your clock is now set and ready  
for use.  
Saskatoon  
Regina  
Ontario  
Winnipeg  
3. Press WAKE –  
repeatedly on the top of the unit to  
select a waking mode.  
OFF 1 or 2  
WARNING: Please avoid playing with  
these buttons after entering the Clock/  
Alarm set mode.  
Pacific Mountain Central Eastern  
Atlantic  
(AST)  
(PST) (MST)  
(CST)  
(EST)  
Corresponding icon lights on the  
large display.  
Wake function  
Warranty information  
Sleep function  
SmartSnoozeTM  
For Canada Customers, please ship  
to:  
Audiovox Return Centre  
c/o Genco  
6685 Kennedy Road,  
Unit#3, Door 16,  
Mississuaga, Ontario  
L5T 3A5  
This Warranty does not apply to any  
product or part thereof which, in the  
opinion of the Company, has suffered  
or been damaged through alteration,  
improper installation, mishandling,  
misuse, neglect, accident, or by removal  
or defacement of the factory serial  
number/bar code label(s). THE EXTENT  
OF THE COMPANY’S LIABILITY UNDER  
THIS WARRANTY IS LIMITED TO THE  
REPAIR OR REPLACEMENT PROVIDED  
ABOVE AND, IN NO EVENT, SHALL THE  
COMPANY’S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER  
FOR THE PRODUCT.  
the exclusion or limitation of incidental  
or consequential damage so the above  
limitations or exclusions may not apply  
to you. This Warranty gives you specific  
legal rights and you may also have  
other rights which vary from state to  
state.  
etc. which were originally provided  
with the product. However DO NOT  
return any removable batteries,  
even if batteries were included  
with the original purchase. We  
recommend using the original  
carton and packing materials.  
Include evidence of purchase date  
such as the bill of sale. Also print  
your name and address and a  
description of the defect. Send via  
standard UPS or its equivalent to:  
Turning off the wake  
alarm or radio  
In sleep mode, you can set the duration  
(up to 90 minutes) before the radio turn  
off automatically.  
12 Month Limited Warranty  
Applies to RCA Audio/Video  
Products  
This operation allows extra sleep time  
after the wake function is on. The alarm  
will be off by pressing SNOOZE, SLEEP,  
To silence the wake function  
momentarily:  
AUDIOVOX ELECTRONICS CORP. (the  
Company) warrants to the original retail  
purchaser of this product that should  
this product or any part thereof, under  
normal use and conditions, be proven  
defective in material or workmanship  
within 12 months from the date of  
original purchase, such defect(s) will be  
repaired or replaced with reconditioned  
product (at the Company’s option)  
without charge for parts and repair  
labor.  
To set the sleep mode:  
WAKE –  
OFF 1, or 2 until the  
To turn off the wake function, press  
SNOOZE on the top of the unit.  
The wake alarm or radio will be  
switched off temporarily. The alarm  
or radio will be on again when the  
snooze period (default: 9 minutes) is  
over. (read “SmartSnoozeTM”)  
Press SLEEP repeatedly to cycle  
among the sleep times available  
(90min, 60min, 30min, 15min and  
OFF. 90min is the default setting) on  
the large display.  
snooze period is over. Snooze function  
can be used repeatedly up to 60  
minutes. After this, the wake function  
will turn off until the next day.  
How to make a warranty claim:  
Illusttratiions contained within this  
publicaation arre for representation only  
and subjecct to change.  
If your product is capable of storing  
content (such as an mp3 player,  
digital voice recorder, etc), it is  
recommended to make periodic  
backup copies of content stored  
on the product. If applicable,  
The radio will be switched on.  
To set the “quiet” period:  
1. Press and hold SNOOZE.  
To check the remaining time in  
sleep mode:  
Audiovox Electronics Corp.  
Attn: Service Department.  
150 Marcus Blvd., Hauppauge  
N.Y. 11788  
The desccriptioons and characteristics  
given iin thiiss document are given as  
a generral inddication and not as a  
guarantee. In oorder to provide the  
highestt qualitty product poossible,  
we reseerve thhe right to mmake any  
improveement oorr modification without  
prior nootice.  
To turn off the wake alarm or  
radio:  
Press OFF. The wake alarm or radio  
will activate again the next day  
unless you switch off the Wake  
function.  
2. Press  
REV or FWD  
to set the  
before shipping a product, make  
a back up copy of content or data  
stored on the device. Also, it is  
advisable to remove any personal  
content which you would not want  
exposed to others. IT IS LIKELY  
THAT CONTENTS AND DATA ON  
THE DEVICE WILL BE LOST DURING  
SERVICE AND REFORMATTING.  
AUDIOVOX ACCEPTS NO LIABILITY  
FOR LOST CONTENT OR DATA,  
OR FOR THE SECURITY OF ANY  
PERSONAL CONTENT OR DATA ON  
THE RETURNED DEVICE. Product  
will be returned with factory  
Press and hold SLEEP to check the  
remaining sleep time on the large  
display.  
quiet period that shows on the  
large display. The time decrements  
or increments will follow by a faster  
rate when you press and hold the  
buttons.  
This Warranty is in lieu of all other  
express warranties or liabilities. ANY  
IMPLIED WARRANTIES, INCLUDING  
ANY IMPLIED WARRANTY OF  
MERCHANTABILITY, SHALL BE LIMITED  
TO THE DURATION OF THIS WRITTEN  
WARRANTY. ANY ACTION FOR BREACH  
OF ANY WARRANTY HEREUNDER  
INCLUDING ANY IMPLIED WARRANTY  
OF MERCHANTABILITY MUST BE  
BROUGHT WITHIN A PERIOD OF 24  
MONTHS FROM DATE OF ORIGINAL  
PURCHASE. IN NO CASE SHALL THE  
COMPANY BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR  
ANY OTHER WARRANTY. No person or  
representative is authorized to assume  
for the Company any liability other than  
expressed herein in connection with the  
sale of this product.  
1-877-833-3491  
To obtain repair or replacement  
within the terms of this Warranty, the  
product is to be delivered with proof  
of warranty coverage (e.g. dated bill  
of sale), specification of defect(s),  
transportation prepaid, to the Company  
at the address shown below.  
Insure your shipment for loss or  
damage. Audiovox accepts no  
liability in case of damage or loss en  
route to Audiovox.  
Pay any charges billed to you by  
the Exchange Center for service not  
covered by the warranty.  
To cancel the sleep mode:  
If you decide to turn off the unit  
Snooze period can be set from 1 to  
30 minutes (default: 9 minutes).  
To disable the wake function  
completely:  
sooner, press SNOOZE or OFF.  
Press WAKE –  
OFF 1 or 2  
3. Release SNOOZE.  
repeatedly on the top of the unit  
until no wake mode icon (1 , 1  
the best accessories for your products.  
This Warranty does not extend to the  
elimination of externally generated  
static or noise, to correction of  
A new or refurbished unit will be  
shipped to you freight prepaid.  
or 2  
, 2  
) shows on the large  
SmartSnoozeTM is only  
available when  
display.  
antenna problems, loss/interruptions of  
broadcast or internet service, to costs  
incurred for installation, removal or  
reinstallation of product, to corruptions  
caused by computer viruses, spyware or  
other malware, to loss of media, files,  
data or content, or to damage to tapes,  
discs, removable memory devices or  
cards, speakers, accessories, computers,  
computer peripherals, other media  
players, home networks or vehicle  
electrical systems.  
What we will do:  
/WAKE1/WAKE2/ is at  
default settings, and without any  
pre-loaded content which may have  
been installed in the originally  
purchased products. Consumer will  
be responsible for reloading data  
and content. Consumer will be  
responsible to restore any personal  
preference settings.  
Provide you with a new, or at our  
option, a refurbished unit. The  
exchange unit is under warranty for  
the remainder of the original product’s  
warranty period.  
the lock  
position.  
© 2010 Audiovox Accessories Corporation  
111 Congressional Blvd., Suite 350  
Carmel, IN 46032  
Trademark(s) ® Registered  
Printed in China  
Properly pack your unit. Include  
any remotes, memory cards, cables,  
Some states do not allow limitations on  
how long an implied warranty lasts or  
 
Reloj  
Radio  
Función despertar  
ADVERTENCIA: por favor evite jugar  
con estos botones después de entrar al  
modo de ajuste Reloj/Alarma.  
Zona horaria Estados Unidos  
recepción de FM y a mantener el radio  
bloqueado en la estación FM en la cual  
está sintonizado.  
Selección de modo radio  
Ajuste de la hora para  
Ajuste Automático del  
3. Presione WAKE –  
OFF 1 ó 2  
Presione RADIO para encender el radio.  
repetidamente en la parte superior  
de la unidad para seleccionar un  
modo de despertador.  
despertar  
reloj  
Seattle  
Olympia  
Washington  
Esta unidad permite establecer dos  
horas para despertar.  
Usted no tiene que ajustar la hora  
del reloj ya que un sistema de ajuste  
automático viene incorporado en este  
reloj, y recibe energía de 2 baterías AA  
(incluidas e instaladas).  
Maine  
Augusta  
Montana  
North Dakota  
Bismarck  
Salem  
Helena  
Selección de banda  
Deslice el interruptor BAND en la parte  
posterior de la unidad para seleccionar  
la banda FM o AM.  
Minnesota  
St. Paul  
Montpelier  
Vt.  
Albany  
New York  
N.H.  
Oregon  
Idaho  
Boise  
Al sintonizar estaciones FM, usted  
puede notar que la estación que  
está sintonizando puede estar bien  
sintonizada en dos o tres puntos  
cercanos en el dial. Sintonice siempre  
con cuidado en el punto más alto y  
claro.  
El ícono correspondiente se ilumina  
en la pantalla grande.  
Concord  
Boston  
South Dakota  
Pierre  
Mass.  
1. Deslice el interruptor  
/WAKE1/  
Ajuste manual del reloj  
Wisconsin  
Madison  
Providence  
Michigan  
Lansing  
Detroit  
R.I.  
Wyoming  
Hartford  
Conn.  
New York  
Trenton  
WAKE2/  
en la parte superior de  
Pennsylvania  
Philadelphia  
Harrisburg  
Md.  
1. Deslice el interruptor  
/WAKE1/  
Chicago  
Iowa  
1
– Despertador 1 mediante  
New Jersey  
Delaware  
Cheyenne  
Nebraska  
Sacramento Carson City  
Nevada  
San Francisco  
Alaska  
(AKST)  
Des Moines  
Salt Lake City  
Utah  
Ohio  
Columbus  
Lincoln  
la unidad a la posición WAKE 1 o  
WAKE 2.  
Indiana  
WAKE2/  
en la parte superior de  
Illinois  
Springfield  
WAansnhapinolgiston, D.C.  
West  
alarma  
Virginia  
Indianapolis  
Denver  
Richmond  
Virginia  
Topeka  
Colorado  
St. Louis  
Charleston  
Frankfort  
Kentucky  
la unidad a la posición del reloj  
.
Kansas  
California  
Jefferson City  
1
2
– Despertador 1 mediante radio  
– Despertador 2 mediante  
Las Vegas  
Summer  
Missouri  
Raleigh  
North Carolina  
Para ajustar el reloj:  
1. Conecte a la corriente  
Winter  
Nashville  
Los Angeles  
Santa Fe  
Tennessee  
Memphis  
Sintonización del radio  
Rote la perilla TUNING a la derecha  
de la unidad para ajustar la frecuencia  
de radio que se muestra en la pantalla  
grande.  
Oklahoma  
Oklahoma City  
Arizona  
Phoenix  
Columbia  
Arkansas  
Little Rock  
2. Presione  
REV o FWD  
para  
2. Presione  
REV o FWD  
para  
South  
New Mexico  
Atlanta  
Carolina  
alarma  
Alabama  
Montgomery  
Mississippi  
Jackson  
Georgia  
establecer la hora de despertador  
respectiva. Los decrementos o  
Inserte la clavija de la  
unidad en una toma de  
corriente CA.  
ajustar la hora del reloj. Los  
decrementos e incrementos de  
tiempo seguirán una velocidad  
más rápida cuando usted presione  
y sostenga los botones. El tiempo  
“:” entre hora y minuto parpadea  
cuando usted está estableciendo el  
tiempo. El ícono AM o PM estará  
también a un lado de la hora.  
Dallas  
Hawaii-  
Aleutian  
(HST)  
2
– Despertador 2 mediante radio  
Louisiana  
Texas  
Baton  
Austin  
Rouge  
New Orleans  
Antena AM  
incrementos de tiempo seguirán una  
velocidad más rápida cuando usted  
presiona y sostiene los botones.  
La función despertar, en  
Houston  
Florida  
Miami  
La unidad está equipada con la  
modalidad GRAD-U-WAKE, el  
volumen de tono de la alarma  
aumentará gradualmente a su  
máximo en aproximadamente 30 a  
45 segundos.  
Una antena de barra de ferrita  
integrada elimina la necesidad de una  
antena exterior para recepción AM.  
Girar la unidad ligeramente puede  
mejorar la recepción de estaciones AM  
distantes.  
Puerto Rico  
2. Seleccione el horario de verano  
Pacific Mountain  
(PST) (MST)  
Central Eastern  
(CST) (EST)  
Atlantic  
(AST)  
Deslice el conmutador  
DST en la parte posterior  
de la unidad para activar/  
desactivar en áreas que  
observen/no observen tal  
cambio de horario.  
AFC integrado  
correspondencia con el indicador  
de tiempo para despertar (WK-1  
para WAKE 1 y WK-2 para WAKE  
2) y el indicador de la hora AM/PM  
parpadeará en la pantalla pequeña.  
El Control de Frecuencia Automático  
Integrado (AFC) funciona sólo en FM.  
Ayuda a reducir la oscilación en la  
Zona horaria Canadá  
Verificación de la hora del  
despertador  
3. Deslice el interruptor  
/WAKE1/  
WAKE2/  
en la parte superior  
Yukon  
Territory  
3. Deslice el interruptor  
/WAKE1/  
3. Seleccione su huso horario  
de la unidad a la posición  
terminar.  
al  
Presione CHECK WAKE TIME  
repetidamente para mostrar la hora  
para despertar 1 y 2 actualmente  
fijada.  
Control de brillo  
Nunavut  
WAKE2/  
en la parte superior  
Presione TIME ZONE  
Northwest Territories  
de la unidad a la posición  
terminar.  
al  
repetidamente en la  
parte posterior de la  
unidad para moverse  
a través de los husos  
horarios (EST > CST > MST > PST  
> AKST > HST > AST > EST...). El  
huso horario predeterminado es  
Este (EST) (consulte los mapas a la  
derecha).  
British  
Columbia  
Deslice el conmutador BRIGHTNESS  
en la parte posterior de la unidad a la  
posición Hi (alta) o Lo (baja) para ajustar  
el brillo de todas las pantallas al frente  
de la unidad.  
Newfoundland  
Summer  
Alberta  
Winter  
Manitoba  
La hora para despertar,  
Selección de la fuente  
para despertar  
correspondientemente el indicador  
de la hora para despertar (WK-1  
para WAKE 1 y WK-2 para WAKE  
2) y el indicador del tiempo AM/  
PM se visualizan en la pantalla  
pequeña.  
Saskatchewan  
Quebec  
Saskatoon  
Regina  
Ontario  
Usted puede ser despertado por radio  
o alarma.  
Winnipeg  
1. Seleccione una estación AM o FM  
(vea las instrucciones en “Radio”).  
Pacific Mountain Central Eastern  
(PST) (MST)  
Atlantic  
(AST)  
(CST)  
(EST)  
Si la función despertar  
Su reloj ya está ajustado y listo para  
usarse.  
correspondiente no está activada,  
OFF se muestra en la pantalla  
pequeña.  
2. Establezca una hora para despertar  
(vea la instrucción anterior).  
Función despertar  
Función dormir  
Garantía limitada  
SmartSnoozeTM  
12 meses de garantía limitada  
cualquier configuración de su preferencia  
personal.  
En modo dormir, usted puede establecer  
la duración (hasta 90 minutos)  
antes de que el radio se apague  
automáticamente.  
o la exclusión o limitación de daño incidental  
o consecuencial, por lo tanto las limitaciones  
o exclusiones anteriores pueden no aplicar a  
usted. Esta Garantía le da derechos legales  
específicos y puede ser que usted tenga  
también otros derechos que pueden variar  
de estado a estado.  
Para apagar el despertador  
de alarma o radio  
remanente del período de garantía del  
producto original.  
o
parte del mismo que, en la opinión  
Aplica a productos de audio/video RCA  
AUDIOVOX ELECTRONICS CORP. (la Compañía)  
garantiza al comprador original a través de  
minorista de este producto, que en el caso de  
que este producto o alguna parte del mismo,  
sometido a uso y condiciones normales, y  
probando que tenga defectos en material o  
mano de obra, en un plazo de 12 meses desde  
la fecha de la compra original, tal(es) defecto(s)  
será(n) reparado(s) o reemplazado(s) con  
producto reacondicionado (a opción de la  
Compañía) sin cargo por las partes y labor  
en la reparación.  
de la Compañía, haya sufrido haya  
o
Esta operación permite tiempo extra  
para dormir después de que la función  
despertar es activada. La alarma se  
apagará presionando SNOOZE, SLEEP,  
Empaque apropiadamente su unidad.  
Incluya cualquier control remoto, tarjetas  
de memoria, cables, etc. que fueron  
suministrados originalmente con el  
producto. Sin embargo, NO regrese  
batería removible alguna, aún si las  
baterías estaban incluidas con la compra  
original. Recomendamos usar el empaque  
y materiales de empaque originales.  
sido dañado mediante la alteración,  
instalación inapropiada, mal manejo, mal  
uso, negligencia, accidente o mediante la  
remoción o borrado del número de serie  
de fábrica/etiqueta(s) de código de barras.  
EL GRADO DE LA RESPONSABILIDAD DE LA  
COMPAÑÍA BAJO ESTA GARANTÍA ESTÁ  
LIMITADO A LA REPARACIÓN O REEMPLAZO  
QUE SE INDICA ANTERIORMENTE, Y, EN  
NINGÚN CASO, LA RESPONSABILIDAD DE  
LA COMPAÑÍA EXCEDERÁ EL PRECIO DE  
COMPRA PAGADO POR EL COMPRADOR POR  
EL PRODUCTO.  
Para silenciar momentáneamente  
la función despertar:  
Para clientes en Canadá, favor de  
enviar a:  
Audiovox Return Centre  
c/o Genco  
6685 Kennedy Road,  
Unit#3, Door 16,  
Para desactivar la función despertar,  
presione SNOOZE en la parte  
superior de la unidad.  
El radio o alarma para despertar se  
apagarán temporalmente. El radio  
o la alarma se activarán otra vez  
cuando el período para dormitar  
(valor predeterminado de 9 minutos)  
termine. (lea “SmartSnoozeTM”)  
Para establecer el modo dormir:  
WAKE –  
OFF 1, o 2 hasta que  
Presione SLEEP repetidamente  
para alternar entre los tiempos  
disponibles para dormir (90 min., 60  
min., 30 min., 15 min. y OFF. 90 min.  
es el valor predeterminado) en la  
pantalla grande.  
el periodo dormitar se termine. La  
función despertar puede ser usada  
repetidamente hasta por 60 minutos.  
Después de esto, la función despertar se  
desactivará hasta el día siguiente.  
Cómo efectuar una reclamación en  
garantía:  
Mississuaga, Ontario  
L5T 3A5  
Si su producto tiene la capacidad  
de almacenar contenido (tal como  
un reproductor MP3, una grabadora  
de voz digital, etc.), se recomienda  
que efectúe respaldos periódicos de  
copias del contenido almacenado en  
el producto. Si es aplicable, antes de  
enviar un producto, haga una copia  
Incluya a evidencia de la fecha de compra  
tal como la nota de venta. También  
Las ilustraciones contenidas dentro de  
esta publicación son para propósitos de  
ilustración solamente y están sujetas a  
cambio.  
escriba su nombre  
y
dirección,  
y
la  
El radio será encendido.  
To set the “quiet” period:  
1. Press and hold SNOOZE.  
descripción del defecto. Envíe mediante  
UPS estándar o su equivalente a:  
Para obtener reparación o reemplazo dentro  
de los términos de esta Garantía, el producto  
debe ser entregado con prueba de cobertura  
de la garantía (por ejemplo, nota de venta  
con fecha), especificación de defecto(s),  
transporte prepagado, a la Compañía a la  
dirección que se indica a continuación  
Para checar el tiempo remanente en  
modo dormir:  
Esta Garantía reemplaza todas las otras  
garantías o responsabilidades expresas.  
CUALQUIER GARANTÍA IMPLÍCITA,  
INCLUYENDO CUALQUIER GARANTÍA  
IMPLÍCITA DE COMERCIABILIDAD, ESTARÁ  
Para desactivar radio o alarma  
para despertar:  
Presione OFF. El radio o alarma  
para despertar se activará otra vez  
al siguiente día a menos que usted  
apague la función Despertar.  
Las descripciones y las características  
presentadas en este documento son dadas  
a modo de indicación general y no de  
garantía. Con el fin de proporcionarle la  
más alta calidad de producto posible, nos  
reservamos el derecho a hacer mejoras o  
modificaciones sin previo aviso.  
2. Presione  
REV ó FWD  
para  
Audiovox Electronics Corp.  
At’n: Departamento de Servicio.  
150 Marcus Blvd.  
Hauppauge N.Y. 11788  
1-877-833-3491  
Presione y sostenga SLEEP para  
checar el tiempo para dormir  
remanente en la pantalla grande.  
establecer el período de quietud  
que se muestra en la pantalla  
grande. Los decrementos e  
de respaldo del contenido  
o
de los  
datos almacenados en el dispositivo.  
También, es aconsejable remover  
cualquier contenido personal que usted  
no querría exponer a otros. ES PROBABLE  
QUE LOS CONTENIDOS Y DATOS EN EL  
DISPOSITIVO SE PIERDAN DURANTE EL  
SERVICIO Y REFORMATEO. AUDIOBOX  
NO ACEPTA RESPONSABILIDAD POR LA  
PÉRDIDA DE CONTENIDO O DATOS, O POR  
LA SEGURIDAD DE ALGÚN CONTENIDO  
O DATO PERSONAL EN EL DISPOSITIVO  
QUE SEA RETORNADO. El producto  
será devuelto con las configuraciones  
LIMITADA  
A
LA DURACIÓN DE ESTA  
incrementos de tiempo seguirán una  
velocidad más rápida cuando usted  
presione y sostenga los botones.  
El período para dormitar puede  
establecerse desde 1 a 30 minutos  
(el valor predeterminado es de 9  
minutos).  
Para cancelar el modo dormir:  
GARANTÍA ESCRITA. CUALQUIER ACCIÓN  
POR VIOLACIÓN DE ALGUNA GARANTÍA  
BAJO LA PRESENTE INCLUYENDO ALGUNA  
GARANTÍA IMPLÍCITA DE COMERCIABILIDAD  
DEBE SER PRESENTADA EN UN PERIODO DE  
24 MESES DESDE LA FECHA DE LA COMPRA  
ORIGINAL. EN NINGÚN CASO LA COMPAÑÍA  
SERÁ RESPONSABLE POR DAÑO ALGUNO  
INCIDENTAL O CONSECUENCIAL POR LA  
VIOLACIÓN DE ESTA O DE CUALQUIER OTRA  
GARANTÍA. Ninguna persona o representante  
está autorizado a asumir por la Compañía  
responsabilidad alguna distinta que la  
expresada en el presente documento en  
relación con la venta de este producto.  
Esta garantía no se extiende a la eliminación  
de ruido o estática generados externamente,  
a la corrección de problemas de antena, a  
la pérdida/interrupciones de transmisión  
o servicio de Internet, a costos incurridos  
por instalación, remoción o reinstalación  
del producto, a corrupciones causadas por  
virus de computadora, software espía u otro  
tipo de software malicioso, a la pérdida de  
medios, archivos, datos o contenido, o al  
daño a cintas, discos, dispositivos o tarjetas  
de memoria removible, bocinas, accesorios,  
computadoras, periféricos de computadoras,  
otros reproductores de medios, redes caseras  
o sistemas eléctricos de vehículo.  
Asegure su embarque por pérdida o daño.  
Audiovox no acepta responsabilidad  
en caso de daño o pérdida en ruta a  
Audiovox.  
Pague todos los cargos que le sean  
facturados por el Centro de Intercambio  
por servicio que no esté cubierto por la  
garantía.  
Si usted decide apagar la unidad  
más temprano, presione SNOOZE u  
OFF.  
Para desactivar completamente la  
función despertar:  
encontrará los mejores accesorios para sus  
productos.  
Presione WAKE –  
OFF 1 ó 2  
repetidamente en la parte superior  
de la unidad hasta que no aparezca  
el ícono de modo despertar (1 , 1  
3. Suelte el botón SNOOZE.  
ó 2  
, 2  
) en la pantalla.  
Una unidad nueva o reconstruida le será  
enviada con flete prepagado.  
predeterminadas de fábrica,  
y
sin  
contenido alguno precargado que  
pudiera haber sido instalado en los  
productos comprados originalmente.  
El consumidor será responsable por  
recargar los datos y el contenido. El  
consumidor será responsable de restaurar  
SmartSnoozeTM está  
disponible solamente cuando  
Lo que nosotros haremos:  
Suministrarle una unidad nueva, o a opción  
nuestra, una reconstruida. La unidad de  
intercambio está bajo garantía por el  
© 2010 Audiovox Accessories Corporation  
111 Congressional Blvd., Suite 350  
Carmel, IN 46032  
el  
/WAKE1/WAKE2/  
está en la posición bloqueo  
.
Algunos estados no permiten limitaciones en  
cuanto a la duración de una garantía implícita  
Marca(s) ® Registrada(s)  
Esta Garantía no aplica a algún producto  
Impreso en China  
 

Radio Shack Home Security System Two Zone Burglar Alarm System User Guide
Rosewill Work Light RSL 112 User Guide
Sagem Network Router 1500 User Guide
Samson Headphones CB88 User Guide
Samsung DVD Player DVD 1010 User Guide
Samsung Indoor Furnishings WE357A0C User Guide
Samsung Projector SVP 6000N P User Guide
Samsung Security Camera SCC C6407 User Guide
Sanyo Battery Charger HR 4 5AU User Guide
Sanyo Flat Panel Television DP42851 User Guide